Cone crusher contains wear parts such as manganese crusher liners, stone crusher machine spare parts, cone crusher liners and so on. cone mantle and cone bowl liners are important parts in cone crusher, during the operation of cone crusher, it should be noted that the materials put into the equipment must meet the crushing requirements, and it is strictly prohibited that the hardness is too large, the moisture is too high or other non-crushing materials enter into the crushing cavity, otherwise it will cause the cone mantle, cone bowl liners dislodgement, the equipment shutdown and other failures, which will affect the construction. At the same time, the cone crusher feeding must be uniform, the ore must be given in the middle of the distribution disc, the material can not be directly with the cone mantle and cone bowl liners direct action, to prevent uneven wear.
Of course, the quality of the cone mantle and cone bowl liners itself is the most important factor, a good quality wear-resistant parts, the surface of the casting is a very high requirement, the casting does not allow cracks and affect the performance of the use of the slag, sand, cold segregation, air holes, shrinkage holes, shrinkage, lack of meat and other casting defects. At present, the cone mantle and cone bowl liners of the cone crusher on the market are made of high manganese steel to ensure proper hardness. What's more, with the rapid development nowadays, the performance of wear-resistant materials is constantly upgraded and even updated. On the whole, it is necessary to choose materials that can rapidly harden the surface under the action of impact load, forming both hard and wear-resistant surface, while still maintaining the original toughness of its inner metal, so as to improve the service life of the cone mantle and cone bowl liners.
